LG UM60F Instruction Manual page 46

THE INDOOR UNIT INSTALLATION
46
Connect the cable to the indoor unit by
connecting the wires to the terminals on the
control board individually according to the
outdoor unit connection. (Ensure that the color
of the wires of the outdoor unit and the
terminal No. are the same as those of the
indoor unit.)
Insert the connecting cable through the bot-
tom side of indoor unit and connect the cable.
(1) Open the Decor
(2) Unscrew the screw of C/Box
(3) Slide up the Metal Plate Cover
(4) Connect the connecting cable
(5) After complete connect the cables, should
assemble the Metal Plate Cover by screw.
Decor
1
Loosen No 1, 2 screws of control box
cover.
2
Connect the cable to the Terminal block as
below diagram
Terminal Block of Indoor Unit
1(L) 2(N)
Outdoor
1(L) 2(N) 3(C)
Power Power Power
connecting cable connecting cable connecting cable
3
1 1
3 3
2 2
3
Secure the cable onto the Control panel
with the Clamp cord.
4
If indoor unit's setting is needed, loosen
No.3 screw and lift up the PCB. (option:
usage of bottom vanes, limit angle of top
vane)
DIP
Description
S/W
Install
S/W 5
scene
Top+Bottom
S/W 7 Vane
CAUTION
!
The Power cord connected to the unit
should be selected according to the
following specifications.
Terminal Block
Clamp Cord
Connecting Cable
S/W OFF S/W ON
Half
Exposed
Concealed
Top vane
vane only