Specifications - Pavilion PV Series Owner's Manual

Specifications-1

Item
Model Name
Installation
Type
Air Supply/Exhaust
Ignition
Operating Pressure DHW
Heating
Minimum Flow Rate
Minimum Operating Flow Rate*
Dimensions (Height) x (Width) x (Depth)
Weight
Pressure Relief Valve Setting
Heating
Connection Sizes DHW Cold Water Inlet
DHW Outlet
Heating Supply
Heating Return
Heating Pressure Relief Valve
Auto Feeder Inlet
Gas Inlet
Condensate Drain
Power Supply Supply
Consumption
Materials Casing
Flue Collar
Primary Heat Exchanger
Secondary Heat Exchanger
Safety Devices
Accessories
* Minimum operating flow rate may change by setting temperature and water temperature.
• Specifications may be changed without prior notice.
• The capacity may differ slightly, depending on the water pressure,
water supply, piping conditions, and water temperature.
Specifications
PV199DV (GHQ-C3201WX-FF PB US)
Indoor / Outdoor Wall mounted
(Recommended 30 psi or more for maximum performance)
27.0" (687 mm) × 18.5" (471 mm) × 12.8" (325 mm)
•
Front Cover, Side/Top Plate: Hot-dipped zinc-aluminum-magnesiumalloy-coated
steel w/ Polyester Coating
•
Back Plate: Hot-dipped zinc-aluminum-magnesiumalloy-coated steel w/o Coating
•
Bottom Plate: Zincified Steel Plate / Polyester Coating
Flame Rod, High Limit Switch, Lightning Protection Device (ZNR),
Freezing Prevention Device, Fan Rotation Detector
Anchoring Screws, Wall Mounting Bracket, Outdoor Temperature Sensor,
Anchoring Screws & Anchors for Outdoor Temperature Sensor
Specification
Power Vented
Direct Ignition
15-150 psi
12-30 psi
0.4 GPM (1.5 L/min)
0.29 GPM (1.1 L/min)
95 lbs.
30 psi
NPT 3/4"
NPT 3/4"
NPT 1"
NPT 1"
NPT 3/4"
NPT 1/2"
NPT 3/4"
NPT 1/2"
120 VAC (60 Hz)
NG: 210 W LP: 210 W
Freeze Prevention: 125 W
PP
Stainless Steel: 316L
Stainless Steel: 316L
39