Setting Heating Temperature - Pavilion PV Series Owner's Manual

Setting Heating Temperature
• Blinking
• The unit has the "Outdoor Reset (Energy Saving)" feature, but this feature is disabled (Factory Default).
• To enable, contact your installer or Pavilion Customer Center at 1-855-443-8468.
is lit on the Operation Display, the Outdoor Reset (Energy Saving) is enabled.
• Heating Temperature is changing automatically based on the Outdoor Temperature.
* Refer to page 22 for details.
The following Heating Temperature Setting can be changed when the "Outdoor Reset" is disabled.
°F
°C
The temperature setting below is example.
The temperature setting necessary depends on the usage, the length of piping and the time of year.
* Heating Temperature range depends on Installer Mode Setting.
Refer to the Installation Manual for details.
1
Press the
2
Press the
The current "Heating
Temperature Setting" and
"Heating Icon" will be blinking.
Set the temperature using
the
16
on the Operation Display is not an Error Code.
General temperature range (Factory Default*)
100 • • • • • • • • • • • • • • • • • • • • •
38 • • • • • • • • • • • • • • • • • • • • •
2
2
1
Operation
button ON.
button once.
buttons .
Screen Display
* The
(e.g.: 10:15AM)
* To return to the home screen, press the
(e.g.: 180°F)
180
Initial factory setting
82
Description
indicator is lit.
button or let panel sit for
approximately 20 seconds.