Setting Domestic Hot Water Temperature (Dhw) - Pavilion PV Series Owner's Manual

Setting Domestic Hot Water Temperature (DHW)
1
Press the
2
Press the
The current "DHW
Temperature Setting" and
"DHW Icon" will be blinking.
Set the temperature using
the
DANGER
Hot Water temperatures over 125°F (52°C) can cause
severe burns instantly or death from scalding.
•
Children, disabled and elderly are at the highest risk of being scalded.
Feel water temperature before bathing or showering.
Temperature limiting valves are available, check with installer.
• When setting the unit to 125°F (55°C in °C mode) or higher,
the DHW High Temperature Icon will flash for 10 seconds and
emit a tone as a high temperature warning.
• Take caution when using the unit again after setting to 125°F
(52°C) or higher. Always check the set temperature before use.
• Do not allow anyone to change the water temperature while hot
water is running.
14
2
2
1
Operation
button ON.
button twice.
buttons .
Screen Display
(e.g.: 10:15AM)
(e.g.: 110°F)
To prevent scalding:
High Temperature
Description
* The indicator is lit.
* To return to the home screen, press the
button or let panel sit for
approximately 20 seconds.
Operation Display
Flashes for 10 sec