New Holland T4030N Service Manual page 47

Clutch mechanical release control - Install
1. Recover and thoroughly clean the master clutch pedal
(1) and the tie rod (2).
2. Install the tie rod pin (1).
3. Install the tie rod (2) and fasten the seeger (3).
4. Install the two indicated needle bearings inside the
clutch pedal axle.
5. Recover and thoroughly clean the pedal axle rod (1).
6. Recover and thoroughly clean the master clutch pedal
holder.
7. Correctly place the master clutch pedal axle (4) on the
holder (3).
8. Move down the tie rod (2).
9. Correctly insert the rod (5) inside the pedal axle (4).
10. Fasten the screw (1).
Clutch - Clutch mechanical release control
47888351 03/08/2016
18.1 [18.100] / 6
1
MOIL16TR00379AA
2
MOIL16TR00378AA
3
MOIL16TR00377AA
4
MOIL16TR00376AA