Advertisement
Engine - Remove
1. Remove the cab as described in operation " Platform
- Remove (90.150)".
2. Extract the fixing pin and remove the ballast (1) ; un-
screw the retaining screws and retrieve the ballast sup-
port (2) .
3. Carry out operation in: Drive shaft - Disassemble
(21.145), propeller shafts and guard, only removal.
4. Unscrew the plug and drain the front transmission cas-
ing (prescribed quantity: 44 l (11.62 US gal)).
5. Disconnect the pipes ( (1) and (2) ) of the transmission
oil cooler and of the front axle differential lock.
6. Disconnect: the transmission oil cooler pipes (1) and
the front axle differential lock pipe (2) .
Engine - Engine and crankcase
47888351 03/08/2016
10.1 [10.001] / 3
1
WLSPVNS10C1-10A
2
WLSPVNS10C1-11A
3
WLSPVNS10C1-12A
4
WLSPVNS10C1-13A
Hide quick links:
Advertisement
