Table of Contents
Advertisement
10 IMPORTANT INFORMATION REGARDING THE REFRIGERANT USED
This product contains fluorinated greenhouse gases. Do not vent gases into the atmosphere.
Refrigerant type:
GWP(1) value:
(1)GWP =
10.1
Factory And Field Charged Units Instructions
The refrigerant system will be charged with fluorinated greenhouse gases, and the factory charge(s) are recordered on the
label, shown below, which is adhered inside the electrical panel. Periodic inspections for refrigerant leaks may be required
depending on European or local legislation. Please contact your local dealer for more information.
Do not vent gases into the atmosphere.
1 Fill in with indelible ink the refrigerant charge label supplied with the product as following instructions:
-
Any refrigerant charge for each circuit (1; 2; 3) added during commissioning
-
the total refrigerant charge (1 + 2 + 3)
-
calculate the greenhouse gas emission with the following formula:
GWP value of the refrigerant x Total refrigerant charge (in kg) / 1000
a Contains fluorinated greenhouse gases
b Circuit number
c Factory charge
d Field charge
e Refrigerant charge for each circuit (according to the number of circuits)
f Total refrigerant charge
g Total refrigerant charge (Factory + Field)
h Greenhouse gas emission of the total refrigerant charge expressed
as tonnes of CO2 equivalent
m Refrigerant type
n GWP = Global Warming Potential
p Unit serial number
In Europe, the emission of greenhouse gases of the total refrigerant charge in the system (expressed
in tonnes of equivalent CO
the applicable legislation.
D–EIMHP01201-18_06EN - 26/27
R134a
1430
global warming potential
) is used to determine the frequency of maintenance interventions. Follow
2
Advertisement
Table of Contents
