Volvo 2010 S40 Owner's Manual page 229

Table of Contents

Advertisement

6. Insert a new bulb by turning it clockwise
(the profile on the bulb holder will corre-
spond with the profile in the base of the
bulb).
7. Reinsert the bulb holder. The mark TOP
should be upward.
Removing the taillight bulb holder
All bulbs in the taillight cluster can be replaced
from the trunk. To access the bulb holders:
1. Switch off all lights and turn the key to
position 0.
1
The wiring to the LED brake lights is permanently connected to the bulb holder. It should not be removed.
2. Remove the covers in the left/right panels
to access the bulb holders.
3. Disconnect the wiring connector from the
affected bulb holder.
4. Press the catches together and pull out the
bulb holder.
5. Replace the defective bulb.
6. Press the bulb holder into place and rein-
stall the cover.
Location of taillight bulbs
Location of taillight bulbs
09 Maintenance and servicing
Brake light (LED)
Taillight
Parking light
Fog light (driver's side only)
Turn signal
Back-up light
NOTE
If the message indicating a burned out bulb
remains in the information display after the
bulb has been replaced, consult a trained
and qualified Volvo service technician.
High-level brake light
These bulbs should only be replaced by a
trained and qualified Volvo service technician.
Replacing bulbs
09
1
``
229

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

S40

Table of Contents