Settings - Atag VA9811RT Operating Instructions Manual

SETTINGS

DO AS FOLLOWS TO OPEN THE SETTINGS MENU:
1.
2.
3.
+
4.
YOU CAN NOW ADJUST THE FOLLOWING SETTINGS:
Button press Options
Press Start/Stop to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start/Stop to step through the entire settings menu.
Press Start/Stop to save the setting value and continue to the next setting.
12
First, open the door. Turn off the dishwasher using the On/Left-on mode button (press and hold). Release the
button.
Press and hold the On/Left-on mode button until the display lights up.
Within five seconds, press and hold the Programme selector and the Long dry button.
Release the buttons when the display shows
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try again if you fail to
open the settings menu the first time.
Current setting.
Settings
Child lock
(Off)
(button lock)
(On)
Buzzer volume
(Off)
(Low)
(High)
Operation volume
(Off)
(Low)
(High)
.
Press to save the set value and continue to the next
Current setting value.
Press to browse between setting values.
Description
You can activate the child lock (button lock) option to
prevent children from starting the dishwasher.
Press the High temperature and Long dry buttons simultan-
eously to temporarily deactivate the button lock when you
want to start the dishwasher. The button lock is automatic-
ally reactivated after 2 minutes.
The dishwasher uses a buzzer to indicate when a pro-
gramme is finished or when a fault has occurred.
This sound is used to confirm each button press.
setting.