Table of Contents
Advertisement
High temperature
Activate this option for improved dishwashing results. The machine
then uses a higher temperature for the main wash. This option
cannot be activated if the Time saver option is selected.
If you want to use the lower temperature, press again so that the
field under the button turns off.
You can vary the temperature as shown below:
Heavy wash:
Normal wash:
Daily wash:
Quick wash:
Super quick wash:
Delicate wash:
Eco wash:
Upper half:
Lower half:
Mixed wash:
Long dry
A higher temperature in the final rinse and a longer drying phase
improves the drying result if you activate the Long dry option. This
causes a slight increase in energy consumption. This option can be
used with all programmes except Time program, Rinse & Dry and
Rinse & Hold. This option cannot be activated if the Time saver
option is selected.
If you want a programme with Short dry, press again so that the
field under the button turns off.
Delayed start
When you select Delayed start, the dishwasher will start 1-24
hours after you press the Start/Stop button.
1 Press the button once to activate Delayed start. Press the
button several times – or hold it in – to set the desired number
of hours.
2 Press Start/Stop and the dishwasher counts down 1 hour at a
time and starts after the selected delay.
Press and hold Start/Stop for three seconds if you want to cancel
the Delayed start option.
NOTE!
Remember to press the Start/Stop button to start the
programme.
10
55 °C / 70 °C
60 °C / 65 °C
60 °C / 65 °C
30 °C / 60 °C
30 °C / 60 °C
40 °C / 50 °C
50 °C / 60 °C
55 °C / 65 °C
55 °C / 65 °C
55 °C / 65 °C
Set time
Press the option button several times – or hold it in – to set the
desired programme time for Time program. You can choose a
programme time between 30 minutes and 3 hours.
Time saver
This option shortens the programme time, but uses more energy
and water. This option can be selected with the programmes Heavy
wash, Normal wash, Daily wash, Upper half, Lower half and Mixed
wash.
START THE DISHWASHER
Press and hold Start/Stop until the display shows
open symbol). This indicates that the dishwasher is ready to start.
Close the door properly, otherwise the dishwasher will not start.
NOTE!
If the machine does not start within 2 minutes of the last button
press, the display returns to showing the last programme run.
TIME REMAINING
Once you have selected a programme and options, the display
indicates how long the programme took the last time it was used.
The remaining time is updated after the water for the final rinse
has been heated.
This may differ somewhat from time to time depending on the
temperature of the water supply, the amount of dishes, the
ambient temperature and other factors.
NOTE!
During the first run of each programme, the remaining time
displayed can be slightly misleading, as the dishwasher is estimating
the time. When you run the programme a second time, the
dishwasher will calculate the remaining time based on the
previous duration of the programme.
STATUS LIGHT
The status light at the bottom on the dishwasher provides
information by means of 3 different colours. Adjust the status light
(the door
Advertisement
Table of Contents
