36
en | Recommended configurations
7.4
Using full-range systems as monitors
LINE and MIC input level control is available for both INPUT 1 and INPUT 2. The 12 o'clock
position is unity gain (no gain or attenuation) and the range to the right of zero is for adjusting
microphone levels.
Notice!
The direction of the arrow indicates the signal path.
Mode:
Location:
Sub:
Tab. 7.6: DSP settings loudspeakers as monitors
See also
–
–
2019-04 | 03 | F.01U.326.891
QuickSmartDSP MONITOR
AUX IN
L
R
OUTPUT
ELX200
Amplifier DSP controls, page 19
Full-Range loudspeaker DSP control menu, page 22
PUSH FOR DSP
|
Live
Monitor
Off
Installation manual
ELX200 Powered Loudspeakers
PUSH FOR DSP
QuickSmartDSP MONITOR
|
AUX IN
L
R
OUTPUT
ELX200
Electro-Voice