Electro-Voice ELX200 Installation Manual page 14

14 en | Tripod and floor monitor operation
Mounting a loudspeaker on a pole
Caution!
We recommend that two or more persons lift and place heavier loudspeakers. Single person
!
lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a pole, do the following:
1.
2.
3.
4.
5.
6.
See also
–
2019-04 | 03 | F.01U.326.891
Place the subwoofer on a level and stable surface.
Insert the M20 threaded pole into the combo pole cup on the top of the subwoofer.
Turn the M20 threaded pole clockwise to secure the pole to the subwoofer.
Using two hands lift the loudspeaker.
Set the pole cup located on the bottom of the loudspeaker onto the pole.
Tighten the thumb screw to secure the loudspeaker to the pole.
The thumb screw is only available on the 12" and 15" full-range loudspeaker models. The
10" full-range loudspeaker does not have a thumb screw.
DSP controls, page 22
Installation manual
ELX200 Powered Loudspeakers
Electro-Voice