Epson Discproducer PP-100NII Administrator's Manual page 28

Use the ▲/▼/
8
9 When the change setting confirmation message ("Change network settings?") appears,
press the button.
• If necessary, set the Jumbo Frame. ("Top menu" - "Network" - "Change Settings" - "JUMBO
FRAME") In the initial state, Jumbo Frame is set to off.
• If [Receiving job Cannot proceed] appears on the LCD, wait until job processing is finished
and then try again.
buttons to enter the default gateway, and press the
Default gateway
XXX. XXX. XXX. XXX
Change network
settings?
Preparation
button.
28