Connecting The Sirius Inv2 To Your Vehicle's Audio System; Direct Wired Audio Connection - Sirius Satellite Radio GS1SI2TK1 User Manual

Connecting Your SIRIUS InV2 to Your Vehicle's
Audio System
There are two ways to connect your SIRIUS InV2 to your vehicle's audio system:
Direct Connection or Wireless Connection. Which one will perform best in your vehicle
depends on your vehicle's audio system.
For the latest information go to http://www.sirius.com/vehicleinstallation.

Direct Wired Audio Connection

If your vehicle's audio system has an "A
connection you can use for your SIRIUS radio. (And if the A
located somewhere on the front of your vehicle radio or elsewhere in the cabin, this is
also the easiest way to connect your SIRIUS receiver.)
1. Purchase an audio cable that matches the connection type of your vehicle's audio
system and your SIRIUS InV2 unit at your local electronics retailer.
• The InV2 unit requires a male
2. Plug the cable's male
InV2 unit. Plug the other end into the A
system. (See Figure 12.)
Vehicle Radio
[
34
Installation
1
" stereo connector.
/
8
1
" stereo connector into the A
/
8
]
I " or "L I " jack it is the best-quality audio
UX N INE N
UDIO
I /L I connector on your vehicle's audio
UX N INE N
To A I
UX N
or L I
INE N
Connector
Stereo Cable
(Sold Separately)
Figure 12
I or L I connector is
UX N INE N
jack on the left side of the
InV SI2 Unit
(Left Side)
A
UDIO
Jack