RHYNO Windshield Cutter RWC-1 Operator's Manual page 7

WARNING: Read and save these instructions for future reference. This manual
contains important safety and operating instructions for battery chargers. Before
using charger, read all instructions and cautionary markings on charger, battery
pack, and product using the battery pack.
1) MAINTENANCE AND STORAGE
a. SAVE THESE INSTRUCTIONS – This
operator's manual contains important
safety and operating instructions for
RHYNO Windshield Cutter™ 14.4V
batteries and 14.4V chargers.
b. Before using the batteries and charger,
read this operator's manual and all
labels on the tool, battery pack and
charger.
c. Use RHYNO Windshield Cutter™ 14.4V
Lithium-ion batteries only on 14.4V
Lithium-ion tool and 14.4V Lithium-ion
charger. Use with other tools and
batteries may result in increased risk of
fire, electric shock or personal injury.
d. Avoid dangerous environments. Do
not charge battery pack in rain, snow,
damp or wet locations. Do not use
battery pack or charger in the presence
of explosive atmospheres (gaseous
fumes, dust or flammable materials)
because sparks may be generated when
inserting or removing battery pack,
possibly causing fire.
e. Charge in a well-ventilated area. Do
not block charger vents. Keep them
clear to allow proper ventilation. Do
not allow smoking or open flames near
a charging battery pack. Vented gases
may explode.
f. Maintain charger
unplugging charger, pull plug rather
than cord to reduce the risk of damage
to the electrical plug and cord.
SAFETY INSTRUCTIONS FOR BATTERY CHARGERS
cord.
Never carry charger by its cord. Keep
cord from heat, oil and sharp edges.
Make sure cord will not be stepped on,
tripped over or subjected to damage or
stress. Do not use charger with damaged
cord or plug. Have a damaged cord
replaced immediately with identical
replacement parts (see "Maintenance").
g. Do not use an extension cord unless it is
absolutely necessary. Using the wrong,
damaged or improperly wired extension
cord could result in the risk of fire and
electrical shock. If an extension cord
must be used, plug the charger into a
properly wired 16 gage or larger
extension cord with pins that are the
same number, size and shape as the pins
on the charger. Make sure that the
extension cord is in good electrical
condition.
h. Charger RWC-15 is rated for 120V AC
only. Charger RWC-25 is rated for 240V
AC only. Charger must be plugged into
an appropriate receptacle with a
matching rating.
i. Use only recommended attachments.
Use of an attachment not recommended
or sold by the battery pack or battery
charger manufacturer may result in an
increased risk of fire, electric shock or
personal injury.
When j. Unplug charger when not in use.
Remove battery pack from unplugged
chargers.
Do not disassemble charger. Incorrect
reassembly may result in an increased
risk of fire, electric shock, electrocution
or exposure to battery chemicals. If
[7]