General Power Tool Safety Warnings; Work Area Safety; Personal Safety - RHYNO Windshield Cutter RWC-1 Operator's Manual

WARNING: Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference.

1) WORK AREA SAFETY

a. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b. Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes.
c. Keep children and bystanders away
while operating
Distractions can cause you to lose
control.
2) ELECTRICAL SAFETY
a. Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b. Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators.
There is an increased risk of electric
shock if your body is earthed or
grounded.
c. Do not expose power tools to rain or
wet conditions.
power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase
the risk of electric shock.

GENERAL POWER TOOL SAFETY WARNINGS

a power
Water entering a
e. When
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
f. If operating the power tool in damp
locations is unavoidable, use a Ground
Fault
protected supply.
tool. reduces the risk of electric shock.

3) PERSONAL SAFETY

a. Stay alert, watch what you are doing
and
operating a power tool. Do not use a
power tool while you are tired or
under the influence of drugs, alcohol
or medication.
inattention while operating power tools
may result in serious personal injury.
b. Use personal protective equipment.
Always
Protective equipment such as safety
glasses, dust mask, protective gloves or
hearing protection used for appropriate
conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your
finger on the switch or energizing the
power tools that have the switch on
invites accidents.
d. Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a
[3]
operating a
Circuit Interrupter
Use of a GFCI
use common
A
wear eye
power tool
(GFCI)
sense when
moment of
protection.