Intended Use - RHYNO Windshield Cutter RWC-1 Operator's Manual

WARNING: Read and save these instructions for future reference. This manual
contains important safety and operating instructions for battery chargers. Before
using charger, read all instructions and cautionary markings on charger, battery
pack, and product using the battery pack.
4
7
1 – Dynamic Cutter Blade
2 – Static Cutter Blades
3- Shear Head
4- Motor
5- Variable Speed Trigger Switch

1) INTENDED USE

a. The RHYNO Windshield Cutter is
designed to cut laminated glass or film-
covered glass like vehicle or building
windows with a thickness of up to 0.240
inches (7 mm). DO NOT use under wet
conditions or in presence of flammable
liquids or gases. This glass cutter is a
professional power tool. DO NOT let
SAFETY INSTRUCTIONS FOR TOOL OPERATION
6
10
9
5
6 - Handle
7 - Battery Pack
8 - Blade Screws
9 - Work light
10 - Drive Control
children come into contact with the tool.
Supervision
inexperienced operators use this tool.
To activate the tool, squeeze the trigger
switch (8). To stop the tool, release the
trigger switch. Your tool is equipped
[10]
3
8
is required
2
1
when