Picture (In Pc Mode) - Dell 1510X User Manual

VGA-B—Use
S-V —Use
IDEO
C V —Use
OMPOSITE IDEO
HDMI—Use
and
NOTE:
You cannot disable your current input source. At anytime, a minimum of
two input sources have to be enabled.

PICTURE (in PC Mode)

Using the Picture menu, you can adjust the display settings of your projector. The
Picture menu, provides the following options:
V —Allows you to optimize the display image: Presentation, Bright,
IDEO MODE
Movie, sRGB (provides more accurate color representation), and Custom (set
your preferred settings). If you adjust the settings for Brightness, Contrast,
Saturation, Sharpness, Tint, and Advanced, the projector automatically switches
to Custom.
NOTE:
If you adjust the settings for Brightness, Contrast, Saturation,
Sharpness, Tint, and Advanced the projector automatically switches to Custom.
B —Use
RIGHTNESS
C —Use
ONTRAST
A —Press
DVANCED
control to activate Picture Advance Menu. See "PICTURE ADVANCED" on
page 35.
and to enable or disable VGA-B input.
and to enable or disable S-Video input.
and to enable or disable Composite Video input.
to enable or disable HDMI input.
to
and adjust the brightness of the image.
and to adjust the display contrast.
on the control panel or press Enter button on the remote
Using Your Projector 33