Dell 1609WX User Manual page 22

1 LAMP warning light
2
TEMP warning light
3
Power
4
Up / Keystone
adjustment
5
Right / Auto Adjust
6
IR Receiver
22 Using Your Projector
• If the LAMP light is solid amber, replace the
lamp (see Changing the Lamp on page 41). If
this problem persists, contact Dell (see
Contacting Dell on page 47).
• If the LAMP light is blinking amber, the
projector automatically shuts down indicating a
system failure. If this problem persists, contact
Dell (see Contacting Dell on page 47).
• A solid amber TEMP light indicates that the
projector, lamp, or lamp driver are overheated.
The display automatically shuts down. Turn the
display on again after the projector cools down.
If the problem persists, contact Dell (see
Contacting Dell on page 47).
• A blinking amber TEMP light indicates that a
projector fan or color wheel have failed and the
projector automatically shuts down. If the
problem persists, contact Dell (see Contacting
Dell on page 47).
Allows you to turn the projector on and off. For
more information, see Turning Your Projector On
on page 17 and Turning Your Projector Off on
page 17.
Allows you to select options from the On Screen
Display (OSD) menu. You can also use the Up
button to adjust he image distortion caused
by tilting the projector.
Allows you to adjust the OSD setting.
You can also use the Right
synchronize the projector to the input source.
Auto adjust does not operate if the OSD is
displayed.
Point the remote control towards the IR receiver
and press a button.
button to