Dell 1210S User Manual page 21

4
TEMP warning light
5
Enter
6
IR Receiver
7
Right / Auto Adjust
8
Down / Keystone
adjustment
9
Left / Source
10 Menu
If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 42 and "Guiding Signals" on
page 46.
Press to confirm the selection item.
Point the remote control towards the IR receiver
and press a button.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE:
Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), and S-video
sources when multiple sources are connected to
the projector.
Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
Using Your Projector 21