Download  Print this page

Troubleshooting Your Projector; Contacting Dell - Dell 1210S User Manual

Dell 1210s: user guide.
Hide thumbs

Advertisement

Troubleshooting Your Projector

If you experience problems with your projector, see the following troubleshooting
tips. If the problem persists, contact Dell™ (see Contacting Dell™ on page 53).
Problem
No image appears on the
screen
Missing Input Source.
Cannot switch to particular
Input Source.
42
Troubleshooting Your Projector
Possible Solution
• Ensure that the lens cap is removed and the
projector is turned on.
• Ensure that the INPUT SELECT is set
correctly in the OSD menu.
• Ensure the external graphics port is enabled.
If you are using a Dell™ portable computer,
press
(Fn+F8). For other
computers, see your respective
documentation. The output signal from the
computer is not according to industry
standards. Should this happen, upgrade the
video driver of the computer. For Dell
computer, see support.dell.com.
• Ensure that all the cables are securely
connected. See "Connecting Your Projector"
on page 9.
• Ensure that the pins of the connectors are
not bent or broken.
• Ensure that the lamp is securely installed
(see "Changing the Lamp" on page 47).
• Use Test Pattern in the Others menu.
Ensure that the colors of the test pattern are
correct.
Go to Advanced Enable/Disable Sources,
ensure that particular Input Source is set to
Enable.
4

Advertisement

Table of Contents

   Also See for Dell 1210S

   Related Manuals for Dell 1210S

Comments to this Manuals

Symbols: 0
Latest comments: