Dell 1210S User Manual page 23

5
Aspect Ratio
6 Mute
7
Video mode
8
Mouse up
9
Mouse down
10 Freeze
11 Blank screen
12 Information
13 S-Video
14 Up
15 Left
16 Menu
17 Volume up
18 Source
19 Volume down
20 Keystone adjustment Press to adjust image distortion caused by tilting
Press to change aspect ratio of a displayed image.
Press to mute or un-mute the projector speaker.
The projector has preset configurations that are
optimized for displaying data (presentation
slides) or video (movies, games, etc.).
Press the Video Mode button to toggle between
Presentation mode, Bright mode, Movie mode,
sRGB, or Custom mode.
Pressing the Video Mode button once will show
the current display mode. Pressing the Video
Mode button again will switch between modes.
Press to move to previous page.
NOTE:
The USB cable must be connected if
you want to use the Page Up feature.
Press to move to next page.
NOTE:
The USB cable must be connected if
you want to use the Page Down feature.
Press to pause the screen image.
Press to hide/show the image.
Press to provide projector native resolution
information.
Press to choose S-Video source.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to activate the OSD.
Press to increase the volume.
Press to switch between Analog RGB, Composite,
Component (YPbPr, via VGA), and S-video
sources.
Press to decrease the volume.
the projector (+40/-35 degrees).
Using Your Projector 23