W
iring diagram
Fig. D-4
Lead wires for connecting to
Controller in Handle set
2. Long sheath of Power supply cord unit
except the coil portion must be tight in
Pipe 25 complete.
3. Be sure to check that Pipe 25 complete
can be smoothly pulled and pushed back.
DUR141, DUR181
Wiring in Pipe 25
1. Insert the long sheath side into Pipe 25 complete as drawn below.
Pipe 25 complete
Long sheath
Coil portion
Coil portion
P 9/ 10
Lead wires for connecting to
DC motor in Motor housing
Short
sheath