R
epair
CAUTION: Repair the machine in accordance with "Instruction manual" or "Safety instructions".
[1] NECESSARY REPAIRING TOOLS
Code No.
1R022
Bearing plate
1R217
Ring 22
1R236
Round Bar for Arbor 7-100
1R286
Round Bar for Arbor 12-50
[2] LUBRICATION
Apply Makita grease N. No.2 to the following portions designated with the black triangle to protect
parts and product from unusual abrasion.
Item No.
Description
10
Motor housing L
Fig. 1
Motor housing R
[3] DISASSEMBLY/ASSEMBLY
[3] -1. Gear shaft complete
DISASSEMBLING
(1) Remove Spool set and Safety cover as drawn in Fig. 2.
Fig. 2
1. While pressing the tabs, pull off Spool set.
Compression spring 17 is removed together
with Spool set.
Compression
spring 17
Tabs of
Spool set
Description
Gear room where Spur gear 48 rotates
DC motor
Note: Each M4x20 Pan head screw has O ring 4 on the thread
Spool set
Supporting Spool holder to remove Spur gear 48
Supporting Spur gear 48 to remove Gear shaft
Removing Spool holder
Supporting Spool holder to press-fit Gear shaft
Portion to lubricate
Spur gear 48
2. Loosen two M4x20 Pan head screws, and remove Safety
cover from Motor housing set.
to prevent losing. It is not necessary to separate M4x20
Pan head screws from Safety cover/ O rings 4.
Reverse side of
M4x20 Pan
Safety cover
head screw
(2 pcs.)
Use for
10
Each O ring 4 on the
thread of M4x20
Pan head screw
M4x20 Pan
head screw
(2 pcs.)
P 2/ 10
Amount
3 g