Iring Diagram - Makita DUR181RT Technical Information

W

iring diagram

Fig. D-2
While facing the wire connecting portions to Motor housing (L) side,
connect Lead wire (red) receptacle to the terminal with Red dot mark
and Lead wire (black) receptacle to the other terminal.
Room for Ball bearing 608ZZ
of Gear shaft complete
Fig. D-3
Power supply cord unit
(black, white)
DUR141, DUR181
Wiring to DC motor
Wire connecting
portions
Motor housing
(L) side
Wiring in Motor housing L
1. Come out at least 5 mm long portion of Power supply cord unit
from the lower edge of Labyrinth figured lead holders.
2. Make sure that Power supply cord unit is fixed in Labyrinth
figured lead holders.
at least 5 mm
Flag receptacles
Red dot mark
Labyrinth figured
lead holders
P 8/ 10