Circuit Diagram - Makita UH6570 Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -4. Switch lever B, Front grip and Protector
DISASSEMBLING
Refer to Fig. 8.
ASSEMBLING
1) When separating Front grip from Switch lever B;
- hook one end of Compression spring 9 with the protrusion of Front grip.
- hook the tab of Switch lever B with the edge of Front grip. And hook
the other end of Compression spring 9 with the protrusion of Switch lever B.
(Fig. 15)
2) Hook Front grip, Switch lever B and Protector complete with Housing set,
and then tighten two M5x30 Pan head screws to assemble Front grip,
Switch lever B and Protector complete to Housing set. (Fig. 8)
3) Set Shear blade ass'y in place. Refer to the clause of [3]-1.
C
ircuit diagram
Fig. D-1
Color index of lead wires' sheath
Black
White
Orange
Purple
Yellow
Brown is used
for some countries.
Brown is used
for some countries.
Terminal block
Blue is used
for some countries.
Areas where Noise suppressor is not required
Terminal block
Blue is used
for some countries.
Areas where Noise suppressor is required
Fig. 15
protrusion of
Switch lever B
Switch
Choke coil
Switch
tab of Switch
lever B
protrusion of
Front grip
Compression
spring 9
Field
Brush holder
Field
Brush holder
P 6/ 7