Mitsubishi Electric CITY MULTI PUHY-P400YEM-A Service Handbook page 56

TEMP
CLOCK
PAR-F27MEA
TIMER SET
2 1
Press the switch for
E
confirmation ( )
3) Method of deletion
• Deletion of group registration information of indoor unit ...................................... 4
[Operation procedure]
1
With the remote controller under stopping or at the display of "HO", continuously press the
A B
switch ( + ) at the same time for 2 seconds to change to the registration mode.
2 E
Press the switch ( ) to display the indoor unit address registered. (As same as 2 )
3
In order to delete the registered indoor unit being displayed on the remote controller, press the
switch two times continuously. At completion of the deletion, the attribute display section will be shown as " – – ".
(See figure below.)
Note: Completing the deletion of all indoor units registered on the remote controller returns to "HO" display.
4
After completing the registration, continuously press the
seconds to change to the original ordinary mode (with the remote controller under stopping).
2
TEMP
CLOCK ON OFF
PAR-F27MEA
TIMER SET
1
Press the switch for confirmation (
twice continuously.
ON/OFF
ON OFF
FILTER
CHECK TEST
Set the address
1
In case of group re-
gistration with other
indoor unit is existing
ON/OFF
FILTER
CHECK TEST
In case of no group
registration with other
indoor unit is existing
F
)
• Registered
1 2
+
• No registration
+
FILTER
• Deletion completed
"– –" indicates the
deletion completed.
• Deletion completed
1
-53-
(Alternative
display)
(Alternative
display)
Same display will appear when
the unit of "007" is not existing.
˚C
ERROR CODE
OA UNIT ADDRESS NO
+
FILTER
CLOCK ON OFF
A B
switch ( + ) at the same time for
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
˚C
INDOOR UNIT ERROR CODE
ADDRESS NO OA UNIT ADDRESS NO
2
F
( )