Nivel System NL600 Instructions Manual page 3

INTRODUCTION
Multitasking self-leveling laser construction levels are used to determine the height in
construction measurements. Model NL600 / NL600G has a visible light beam (NL600 - red
beam, NL600G - green beam) and it can be used at work inside and outside the building. The
device is powered by rechargeable batteries which use advanced micro-controlled charging
technology.
NL series levels may designate a vertical or horizontal laser plane, additionally the device define
the axis of the laser plane (laser line - point up and down). The device can also "draw" a laser
line (scan function) – thanks to it it's possible to stop the beam at a given distance. NL600 /
NL600G models can be controlled from the device control panel or remotely, with remote
control.
Laser level is waterproof and can be used outdoors, even in the rain. However, these devices
can't be submerged in water
Laser module
MENU
Charge socket
PRECAUTIONS
WARNING: the device has a built in laser source which generates laser beam. It Is not allowed
to disassembly the device by "your own".
There is a risk of fire, electric shock, or injury while self-repair.
Repairs can be made only by Nivel System service or its authorized representatives.
The laser beam can be hazardous to the human eye if the device is improperly operated.
Never repair the laser by your own.
Laser plumb up / masking flap
Laser plumb down
3
Optical glass
Handle