Related Manuals for Nivel System CL3D
Summary of Contents for Nivel System CL3D
- Page 1 Cross laser 3D CL3D Thank you for purchasing Nivel System cross laser CL3D.For best use of purchased instrument, please carefully read the manual and keep it in safe place, to use this manual in the future.
- Page 2 Construction Cross laser housing is secured by rubber cover (protection against damage due to breakdown or impact). In set as standard you can find CL3D cross laser batteries, strap, casing and bracket (magnet wall shelf, geodetic tripod adapter) Markings on panel...
- Page 3 Using the laser To turn on the laser set the switch in ON position The device will start to display the beam in horizontal. If you want to work with laser sensor, laser must be switched into modulation mode , diode near the icon will light up in green.
- Page 4 1/4”, 5/8” Mount (screw) Dimensions 162 x 79 x 127 [mm] Weight 1,3 kg Nivel System – service, support TPI Sp. z o.o., Bartycka 22, 00-760 Warsaw, Poland +48 22 651 03 06, +48 22 651 03 09, tpi@tpi.com.pl www.nivelsystem.com...
Need help?
Do you have a question about the CL3D and is the answer not in the manual?
Questions and answers