Advertisement
Quick Links
Advertisement
Related Manuals for Nivel System CL1D
Summary of Contents for Nivel System CL1D
- Page 1 Nivel System CL1D Laser Crossliner...
-
Page 2: How To Operate The Unit
HOW TO OPERATE THE UNIT RIGHT SIDE: Pendulum Lock This Cross Line Laser is a precision instrument and should be treated with care. When not in use, the pendulum should always be in the Off position (figure 1), To lock the pendulum allows the Cross Line Laser to better withstand vibration and trauma incurred during transportation or if the unit is dropped. - Page 3 MIDDLE SIDE-Locked Line Angle In the locked line angel position (figure 2), the pendulum is in the locked position and will not automatically level. When in the locked line position, both two laser lines will be on and flash slowly. The Red Lock LED will be on as well. Figure 2...
- Page 4 LEFT SIDE-Automatic Leveling When the pendulum is unlocked (figure 3), the pendulum is free to automatically level, In order for the Cross Line Laser to automatically level, the base of the unit needs to be within 3.5°of level. Figure 3...
-
Page 5: Control Panel
Control Panel: Low Power Indicator Pulse Indicator Pulse Mode Line Selection (with detector) - Page 6 Utilities of Panel -Pulse Mode: It can make the laser diode with PULSE(The pulse indicator will be on). The laser line is able to be picked up by detector after this function is activated. -Line Selection: By pressing Line Selection can make a various change/collocation of laser lines.
- Page 7 Figure 4...
-
Page 8: Alarm Functions
Alarm Functions Out Level Alarm: When the pendulum is unlocked and the Cross Line Laser is within 3.5°of level, the unit will be in automatic leveling range, in this situation no LED light will be on. When the base of the unit locates outside the 3.5°leveling range the laser beam will flash meanwhile an audibly warning will be sent out from Cross Line Laser. - Page 9 What is included with your Red Beam Palm Laser 1. Instrument CL1D 2. Laser sensor (with bracket) 3. Laser target 4. Rotatable base 5. Alkaline batteries 6. Plastic case 7. Manual...
-
Page 10: Specification
Specification: Accuracy ±1mm/5m Leveling Range ±3.5° Working Range/With Detector 15m/60m with detector Tripod Thread 1/4" Laser Type 635 nm, laser class II Beam display / planes horizontal (360°), vertical (90°) Operating Temperature -10℃ to 50℃ Storage Temperature -20℃ to 60℃ Dimension 110x60x121 mm Protection Class Spray Water/Dust...