Table of Contents
Advertisement
Operation and Adjustments
10.0
Before using your Highback Booster Car Seat in your vehicle, you must
assemble the Back Support.
10.1 Assembly and Removal of Back Support
To assemble Back Support:
• Place Booster Car Seat on the floor
or other firm surface.
• Align both tabs on bottom of Back
• Rotate Back Support forward to
firmly on top of Back Support until you
• Check to be sure seat pad is not
To remove Back Support:
• Place Booster Car Seat on the floor or
other firm surface.
• While holding the Booster Car Seat base
KMC0039 112712.indd 37
Support with openings in back of the
1
seat base
.
an upright position
hear a "click" and both tabs are fully
inserted into the openings and the
Back Support feels secure and stable
trapped between the Back Support
and the seat base
down, pull Back Support straight up until
it stops, then rotate backrest backward
and lift out.
NOTE: Follow steps shown in illustrations
but in reverse order.
2
pressing down
4
.
35
1
2
3
.
3
4
11/27/12 7:26 AM
Advertisement
Table of Contents
