LG 65EW960H Commercial Mode Setup Manual page 59

(Continued from previous page)
3. If you would like to enable SoftAP:
• Select/highlight SoftAP and press the Wheel (OK) button on the
Installer Remote.
• When you initially access the SoftAP screen (see example at
right), the OFF/ON toggle button at the top right of the screen is
selected/highlighted by default. Press the Wheel (OK) button on
the Installer Remote to turn SoftAP ON.
• To enable use of a randomly generated security key for SoftAP
access, set the Use Default field to "Enable" (the Security Key
field will subsequently be grayed out and the random security key
will be displayed).
• To specify your own security key for SoftAP access, set the Use
Default field to "Disable." Then, select the Security Key field and
press the Wheel (OK) button. In the data entry field, use the
number keys on the Installer Remote to direct enter a numeric
security key, or use the arrow keys to select the appropriate
alphanumeric characters—at least eight, but no more than 64—
from the pop-up virtual keyboard displayed at the bottom of the
screen. Note that the security key may not contain any special
characters (:, /, \, @, etc.). When you are done, select Enter from
the virtual keyboard, and then press the Wheel (OK) button on
the Installer Remote.
• Select the appropriate values in the Wi-Fi Signal Strength and
Wi-Fi Channel fields, as required.
4. If desired, you can specify a name for this TV so that it is easy
to identify and differentiate from other TVs for which sharing has
been/will be enabled.
Note: By default, the TV name is the TV's serial number. However,
if a room number is specified in the EZ-Manager Wizard or in the
General Menu / Room Info screen, the TV name is changed to the
room number.
To edit the TV name, use the Up/Down arrow keys to select the TV
Name field, and then press the Wheel (OK) button. You can then use
the number keys on the Installer Remote to direct enter a numeric
TV name, or you can use the arrow keys to select the appropriate
alphanumeric character(s) from the pop-up virtual keyboard at the
bottom of the screen. When you are done, select Enter from the
virtual keyboard, and then press the Wheel (OK) button on the
Installer Remote.
5. Once all fields are completed as required, use the arrow keys on the
Installer Remote to return to the IP Environment Menu, as necessary,
or press BACK/EXIT to exit the IP Environment Menu.
Note: While Smart Share, Screen Share, DMR, and Bluetooth Sound
Sync settings are clonable, DIAL and SoftAP settings, as well as the
TV name cannot be cloned.
206-4307
IP Environment Setup (Cont.)
MEDIA SHARE
Network
Pro:Centric
Smart Share
Disable
Screen Share
Media Share
Disable
DMR
Disable
Pre-loaded
Apps
Bluetooth Sound Sync
Disable
DIAL
Disable
TV Name
406KCEA6Q508
SoftAP
Notes:
•
Screen Share MUST be enabled in
addition to Smart Share in order for
guests to use Wi-Fi Direct.
•
If you enable Bluetooth Sound Sync,
a pop-up confirmation banner will be
displayed since enabling Bluetooth
Sound Sync renders Wireless LG
Sound Sync unavailable. Select
Yes to continue.
SOFTAP
Network
Media Share /
Pro:Centric
Use Default
Disable
Security Key
Media Share
00000000
Wi-Fi Signal Strength
Not Used
Pre-loaded
Apps
Wi-Fi Channel
Auto
^
^
^
^
^
^
ON
^
^
^
^
59