Table of Contents
Advertisement
Chapter 02
Preparations
Installation
Checking the space around the product
Make sure to have enough space for ventilation when placing the product. An internal temperature rise
may cause fire and damage the product. Maintain enough space around the product as shown in the
diagram when installing the product.
― The exterior may differ depending on the product.
10 cm
10 cm
10 cm
10 cm
10 cm
Adjusting the Product Tilt and Height
― The colour and shape of parts may differ from what is shown. Specifications are subject to change without
notice to improve quality.
-2.0° (±2.0°) ~ 92.0° (±2.0°)
-15.0˚ (±2.0˚) ~ +15.0˚ (±2.0˚)
-9.0˚ (±2.0˚) ~ +13.0˚ (±2.0˚)
•
The product tilt can be adjusted.
•
When adjusting the tilt and height, hold both sides of the product and avoid using excessive force to
prevent damage.
•
When adjusting the stand height, you may hear a noise. This noise is generated because the ball
inside the stand slides when the stand height is adjusted. It is a normal noise and not a product
malfunction.
0 ~ 120.0 mm (±5.0 mm)
9
Advertisement
Table of Contents
