Table of Contents
Advertisement
Chapter 03
Connecting and Using a Source Device
Read below before installing the product.
1
Before installing the product, check the shapes of both ports of the supplied signal cables and the
shapes and locations of the ports on the product and external device.
2
Before connecting signal cable, make sure you remove the power cables from both the product and
the external device to prevent damage to the product due to a short circuit or over current.
3
After all signal cables have been properly connected, connect the power cables back to the product
and the external device.
4
After installation is completed, make sure you read the user guide to acquaint yourself with the
product functions, precautions and other information required to use the product properly.
― Connecting parts may differ in different products.
― Provided ports may vary depending on the product.
Ports
― The functions available may vary depending on the product model. The colour and shape of parts may differ
from what is shown. Specifications are subject to change without notice to improve quality. Refer to the
actual product.
C27G7*T*
HDMI IN
C32G7*T*
HDMI IN
Port
Description
Connect to an audio output device such as headphones or earphones.
HDMI IN
Connects to a source device using an HDMI cable or HDMI-DVI cable.
DP IN 1
Connects to a PC using a DP cable.
DP IN 2
Connects to a PC using a USB cable. Compatible with a USB cable version 3.0
or lower.
― This port can only connect to a PC.
Connect to a USB device.
― Super charging is possible using the
devices faster than typical USB port. The speed depends on the connected
devices.
Connects to the AC/DC adapter.
DC 22V
― C27G7*T* model only.
Connects to the AC/DC adapter.
DC 24V
― C32G7*T* model only.
DP IN 1
DP IN 2
(PC IN)
DC 22V
DP IN 1
DP IN 2
(PC IN)
DC 24V
port only. This port charges
13
Advertisement
Table of Contents
