Table of Contents
Advertisement
Chapter 02
Preparations
Installation
Attaching the Stand
― Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
― Disassembly is the reverse order of assembly.
― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Separating the stand neck from the stand base
Lift the assembled stand slightly and press the PUSH button on the bottom of the base.
While holding down the PUSH button, turn the stand neck anticlockwise to remove it.
1
Check the direction of the arrow on the stand base.
Align the direction of the arrow on the stand base with the
front direction of the stand neck, and then insert the stand
neck from top to bottom.
2
Turn the stand neck clockwise to fasten it to
the base.
Lift the stand slightly and check that the
PUSH button on the bottom of the base
protrudes.
9
Advertisement
Table of Contents
