Connect To Wi-Fi - Honeywell W1KS Installation Instructions Manual

Connect to Wi-Fi

1
Choose your network from the list. Press
NEXT.
2
Enter your Wi-Fi password, if necessary.
Press NEXT.
3
When connected to Wi-Fi, the LED will
turn solid green for 5 minutes, then turn
off to preserve battery life.
Note: After you connect the detector to your
Wi-Fi network the first time, if you remove
and replace the detector's batteries, it will
reconnect to your Wi-Fi network automatically.
Configure
Continue to follow instructions in the app to configure
your detector. Set the high and low levels for humidity and
temperature warnings, and identify the people you want notified
in case of an alarm. These settings can be updated at any time
using the app.
7
For help, go to getconnected.honeywell.com