Table of Contents
Advertisement
Leak detected
If a leak is detected, the detector will
sound a loud alarm.
IMPORTANT
It can take up to one minute for the
alarm to sound after water is detected.
You can silence the alarm from the app
by pressing the Mute button, then start
the alarm again by pressing Unmute.
IMPORTANT
It can take up to one minute for Mute or
Unmute commands to take effect.
After you've addressed the cause of the alert,
wipe dry the detector and cable sensor and
put them back in place.
13
For help, go to getconnected.honeywell.com
Advertisement
Table of Contents
