Table of Contents
Advertisement
LOG SPLITTER OPERATION
This log splitter is equipped with"ZHB"control system that requires to be operated by both
hands of the user-Left hand controls the hydraulic control lever while right hand controls the
pushbutton switch. The log splitter will freeze upon absence of either hand. Only after both
hands release the controls, the log pusher starts to return backward to the starting position.
The splitting force and speed are governed by the 2-stage control lever.
Push the lever in the 1st stage about half way for faster speed at less
splitting force to split usual logs; Push the lever in the 2nd stage all way
for maximum splitting force at slower speed to split particularly hard
and seasoned logs. These stages can be shifted by simply raising and
lowering the lever.
Never force the log splitter for more than 5 seconds by keeping pressure on it to
split excessively hard wood.
After this time interval, the oil under pressure will be overheated and the machine could
be damaged. For such extremely hard log, rotate it by 90o to see whether it can be split
in a different direction. In any case, if you are not able to split the log, this means that its
hardness exceeds the capacity of the machine and thus that log should be discarded to
protect the log splitter.
65575UK00M103.indd 8
8
2017/9/11 9:04:24
Advertisement
Table of Contents
