Singer SNG21-09IVi User Manual page 77

• After starting up TIMER ON or TIMER OFF, set the constant circulating
valid. After that, air conditioner will be turned on or turned off according the
setting time. ON/OFF button has no effect on setting. If you don't need this
function, please use remote controller to cancel it.
HEALTH FUNCTION/IONIZER
Health function will be set during turning on the air conditioner. Turn off the unit
will also turn off heath function.
FUNCTION INTRODUCTION FOR COMBINATION BUTTONS
Energy Saving function
Under cooling mode, press «TEMP» and « CLOCK» buttons simultaneously
to start up or turn off energy-saving function. When energy-saving function
is started up, «SE» will be shown on remote controller, and air conditioner
will adjust the set temperature automatically according to ex-factory setting to
reach to the best energy-saving effect. Press «TEMP» and «CLOCK» buttons
simultaneously again to exit energy-saving function.
Note:
• Under energy saving function, fan speed is defaulted at auto speed and it
can't be adjusted.
• Under energy-saving function, set temperature can't be adjusted. Press
«TURBO» button and the remote controller won't send signal.
• Sleep function and energy-saving function can't operate at the same time.
If energy-saving function has been set under cooling mode, press sleep
button will cancel energy-saving function. If sleep function has been set
under cooling mode, start up the energy-saving function will cancel sleep
function.
8 ºC Heating function
Under heating mode, press «TEMP» and «CLOCK» buttons simultaneously to
start up or turn off 8 ºC heating function. When this function is started up,
and «8℃ « will be shown on remote controller, and the air conditioner keep the
heating status at 8 ºC . Press «TEMP» and «CLOCK» buttons simultaneously
again to exit 8℃ heating function.
Note:
• Under 8℃ heating function, fan speed is defaulted at auto speed and it
can't be adjusted.
• Under 8℃ heating function, set temperature can't be adjusted. Press
77
GB