Singer SNG21-09IVi User Manual page 73

• When selecting dry mode, the air conditioner operates at low speed under
dry mode. Dry indicator on indoor unit is ON. Under dry mode, fan speed
can't be adjusted. Press "SWING" button to adjust fan blowing angle.
• When selecting fan mode, the air conditioner will only blow air, no cooling
and no heating. Press "FAN" button to adjust fan speed. Press "SWING"
button to adjust fan blowing angle.
• When selecting heating mode, the air conditioner operates under heat
mode. Heat indicator is ON. Press
Press "FAN" button to adjust fan speed. Press "SWING" button to adjust
fan blowing angle.
Note:
• For preventing cold air, after starting up heating mode, indoor unit will delay
1~5 minutes to blow air. Actual delay time depends on indoor ambient
temperature.
• Set temperature range from remote controller is 16~30 oC. Fan speed,
auto, low speed, medium speed, high speed.
3 FAN button
Pressing this button can set fan speed circularly as: auto (AUTO),
medium, high and again AUTO.
Note:
• Under AUTO FAN speed, air conditioner will select proper fan speed
automatically according to ex-factory setting.
• Fan speed under dry mode is low speed.
• X-FAN function: Hold fan speed button for 2s in COOL or DRY mode, the
icon is displayed and the indoor fan will continue operation for a few
minutes in order to dry the indoor unit even though you have turned off the
unit. After energization, X-FAN OFF is defaulted. X-FAN is not available
in AUTO, FAN or HEAT mode. This function indicates that moisture on
evaporator of indoor unit will be blowed after the unit is stopped to avoid
mould.
• Having set X-FAN function on: After turning off the unit by pressing ON/OFF
button indoor fan will continue running for a few minutes. at low speed. In
this period, Hold fan speed button for 2s to stop indoor fan directly.
• Having set X-FAN function off: After turning off the unit by pressing ON/
or button to adjust set temperature.
73
low,
GB