OFF button, the complete unit will be off directly.
4 SWING button
Press this button can select up & down swing angle. Fan blow angle can be
selected circularly as below:
•
When selecting , air conditioner is blowing fan automatically. Horizontal
louver will automatically swing up & down at maximum angle.
•
When selecting , ,
position. Horizontal louver will stop at the fi xed position.
•
When selecting
Horizontal louver will send air at the fi xed angle.
•
Hold
button above 2s to set your required swing angle. When reaching
your required angle, release the button.
Note:
, , , may not be available in your model. When air conditioner receives this
signal, the air conditioner will blow fan automatically.
5 TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode.
icon is displayed on remote controller. Press this button again
to exit turbo function and
6
/
buttons
•
Press
or
button once to increase or decrease set temperature 1 oC.
Holding
or
change quickly. On releasing button after setting is fi nished, temperature
indicator on indoor unit will change accordingly. Temperature can't be
adjusted under AUTO mode.
•
When setting TIMER ON, TIMER OFF or CLOCK, press
to adjust time. Refer to CLOCK, TIMER ON, TIMER OFF buttons. When
setting TIMER ON, TIMER OFF or CLOCK press
time.
No display
( horizontal louvers stops
at current position)
, ,
,
,
, air conditioner is blowing fan at fi xed angle.
icon will disappear.
/
button, 2s later, set temperature on remote controller will
, air conditioner is blowing fan at fi xed
74
or
button
or
button to adjust
GB