Singer SNG21-09IVi User Manual page 75

7 SLEEP button
Under COOL, HEAT or DRY mode, press this button to start up sleep function.
icon is displayed on remote controller. Press this button again to cancel
sleep function and
8 TEMP button
By pressing this button, you can see indoor set temperature, indoor ambient
temperature or outdoor ambient temperature (not available) on indoor unit's
display. The setting on remote controller runs as below:
• When selecting
indicator on indoor unit displays set temperature.
• When selecting
unit displays indoor ambient temperature.
• When selecting
unit displays outdoor ambient temperature (not available).
Note:
• Outdoor temperature display is not available. At that time, indoor unit
receives signal, while it displays indoor set temperature.
• It is It's defaulted to display set temperature when turning on the unit. There
is no display in the remote controller.
• Only for the models whose indoor unit has dual-8 display.
• When selecting displaying of indoor or outdoor ambient temperature,
indoor temperature indicator displays corresponding temperature and
automatically turn to display set temperature after three or fi ve seconds.
9 WiFi button (optional)
Press this button to turn on WiFi function. "WiFi" icon will display on the remote
controller. Hold "WiFi" button for 5 seconds to turn off WiFi function and "WiFi"
icon will disappear.
Under off status, press "MODE" and "WiFi" buttons simultaneously for 1
second. WiFi module will restore factory settings.
10 LIGHT button
Press this button to turn off display light on indoor unit.
icon will disappear.
no display
or no display with remote controller, temperature
with remote controller, temperature indicator on indoor
with remote controller, temperature indicator on indoor
75
icon on remote
GB