Table of Contents
Advertisement
Available languages
Available languages
How to use
1.
Use the measuring cup provided in the package to measure and add rice to the inner pot.
2.
By measuring cup, add water and rice according to the following standard:
Cups of Raw Rice
6 cups
4 cups
2 cups
3.
Set inner pot in cooker. Place rice and water in inner pot. Close the lid firmly. Turn pan
gently to right and left and close the cover firmly.
4.
Plug in power cord. Do not plug in until ready to cook. Otherwise, rice may be spoiled. If pot
is not in cooker, cooking will not begin.
5.
Set the switch to position "I" (on) to turn on the appliance. Press the Cook button on the
front of the unit, the "cook" indicator tells you that cooking has started.
6.
When the rice is done, the switch will pop up. After the switch pops up, leave covered for at
least 15 minutes to steam rice.
7.
Set the switch to postion "O" to switch the appliance off. Then remove the plug from the
socket. Do not pull the plug out of the socket by the cable, but always hold it by hand.
8.
When you stew, the water level should not more than 70% of the volume.
9.
Do not cover the ventilating hole to avoid scaling.
CAUTION:
TO REDUCE THE RISH OF ELECTRIC SHOCK, COOK ONLY IN REMOVABLE
CONTAINER.
CAUTION:
Before cooking, clean the bottom of the inner pot and the surface of the heating
plate. Then turn the pot clockwise and anti-clockwise to ensure that it sits properly
onto the heating plate inside the rice cooker. If not, the rice cooker will not work or
might get damaged.
SAVE THESE INSTRUCTIONS
THIS PRODUCT IS FOR HOUSEHOLD USE ONLY!
Water (add to the line on pot)
6-6,5 cups
4-4,5 cups
2-2,5
cups
EN
2
Advertisement
Table of Contents
