Table of Contents
Advertisement
3. MENU settings
SW SETUP <continued>
Menu item
PEAKING
COLOR
PEAKING LEVEL
FOCUS RING
DRIVE
FOCUS MACRO
AREA MODE
CUSTOM AF
AF SPEED
AF SENSITIVITY
AF AREA WIDTH
WFM
(AG-UX180 only)
WFM TYPE
(AG-UX180 only)
WFM POSITION
(AG-UX180 only)
ZEBRA
Description
Set highlighting color for
the peaking focus assist.
Set highlighting level of the
peaking focus assist.
Set the type of focus
control by the focus ring.
Turn ON/OFF macro
mode.
Choose the feature that
works when tapping the
subject on the built-in
LCD.
AF characteristic
customization (AF Speed
and sensitivity) can be
used when this item is set
to ON.
Set speed of auto focus
control.
Set sensitivity of auto
focus control.
Set the size of window
where auto focus is
enabled.
Display the Waveform or
Vector scope.
Choose WFM display type.
Set WFM display position.
Set type of light indication
(Zebra or Spot meter).
Value
(Factory default setting underlined)
Red / Blue / Yellow / White
-7 – 0 – +7
SPEED(*) / COARSE / FINE
* Focus control speed varies in response to
rotation speed of the focus ring.
ON / OFF
Focus adjustable range at wide-end is from
10cm to infinity with MACRO: ON. (from
1meter to infinity with MACRO: OFF).
INH, FOCUS, IRIS, YGET, FOCUS/IRIS,
FOCUS/YGET
INH：No function is assigned.
FOCUS：Adjust the focus so that the pointed
subject is in focus.
IRIS：Adjust the iris so that aperture level is
appropriate for the pointed subject.
Y GET：Indicate Y level of the pointed subject.
FOCUS/IRIS：Adjust both focus and iris for the
pointed subject.
FOCUS/YGET：Adjust focus and indicate Y level of
the pointed subject.
ON / OFF
-5 - 0 - +5
0 – 5 - 10
Use the jog-dial to adjust window size.
ON / OFF
WAVE , VECTOR, WAVE/VECTOR
TOP/LEFT / TOP/RIGHT / BOTTOM/LEFT /
BOTTOM/RIGHT
ZEBRA1 / ZEBRA2 / MARKER / OFF
24
Advertisement
Table of Contents
