Input Source Selection (Component, Scart, Hdmi) - Canon LV-8235 User Manual

Video Input

Input Source Selection (COMPONENT, SCART, HDMI)

Direct Operation
Choose COMPUTER 1(COMPONENT) or COMPUTER 1
(SCART) by pressing the the COMPONENT or COMPUTER
1 button on the remote controller; choose HDMI by pressing
the HDMI button on the remote controller.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point  buttons to select Input and
then press the Point  or the OK button.
2
Use the Point  buttons to select COMPUTER 1
and
then press the Point  button; use the Point 
buttons to select ANALOG PC, COMPONENT or
SCART and then press the OK button.
OR
Use the Point  buttons to select HDMI, and then
press the OK button;
When the input source is coming from
COMPONENT
video equipment connected to the
COMPUTER IN 1/COMPONENT IN terminal
with a Component-VGA Cable, select
COMPONENT.
When the input source is coming from video
SCART
equipment connected to the COMPUTER
IN 1/S-VIDEO IN/COMPONENT IN terminal
with a Scart-VGA Cable, select SCART.
When the video signal is connected to the
HDMI
HDMI terminal, select HDMI.
 Note:
When the Auto input function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.53).
44
Remote Controller
COMPUTER 1 button
COMPUTER 1 (ANALOG PC)
HDMI button
COMPONENT button
3D
Input Menu
Press the Point ▲▼ buttons
to select COMPONENT or
SCART.
COMPUTER 1 (SCART)
HDMI
COMPUTER 1
(COMPONENT)