Manual Pc Adjustment - Canon LV-7545 Owner's Manual

Canon lv-7545: user guide

Assembly and installation instructions (1 page)

Brochure (2 pages)

Table of Contents

COMPUTER INPUT

This projector can automatically tune to the display signals from most personal computers currently distributed. However,

some computers employ special signal formats which are different from the standard ones and may not be tuned by Multi-

Scan system of this projector. If this happens, projector cannot reproduce a proper image and the image may be recognized

as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has a Manual PC Adjustment to enable you to precisely adjust several parameters to match with those special

signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This

enables you to recall the setting for a specific computer whenever you use it.

Note : This PC ADJUST Menu cannot be operated when in digital signal input on DVI terminal and "RGB" is selected on PC

SYSTEM MENU (P23).

Press MENU button and ON-SCREEN MENU will appear. Press

POINT LEFT/RIGHT button to move a red frame pointer to PC

ADJUST Menu icon.

Press POINT DOWN button to move a red frame pointer to the

item that you want to adjust and then press SET button.

Adjustment dialog box will appear. Press POINT LEFT/RIGHT

button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display.

Press POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

The number of total dots in one horizontal period. Press POINT

LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press POINT LEFT/RIGHT

button(s) to adjust the position.

Vertical

Adjusts vertical picture position. Press POINT LEFT/RIGHT

button(s) to adjust the position.

Current mode

Press SET button to show the information of computer selected.

Clamp

Adjusts clamp level. When the image has a dark bar(s), try this

adjustment.