Page 1
Monitor port allows connection to Allen & Heath ME personal mixing system. The AR2412 is simply an audio interface. It cannot be used by itself. It must connect to the GLD or Qu mixer which is where the audio is processed.
Page 2
The preamps connect an AR84 or AB168 rack to add further are built into the AR2412 rack and their Gain, mic/line inputs and XLR line outputs. The GLD Pad and 48V phantom power is remote controlled system numbers these sockets as dSNAKE Exp ...
AB168 AudioRacks include an EXPANDER port. You can use this to connect to an AR84 or AB168 AudioRack. The AR2412 AudioRack cannot be used as an expander in a Qu system. You can connect up to two AudioRacks in a Qu system. This includes the main rack and one expander rack.
Page 5
CH1-16 Out1-8 7-16 = unused Out9-16 AB168 AB168 EXPANDER Qu-24 Qu-24+AR84 – 8 remote inputs. Qu-24+AR2412 – Access all 24 – All inputs and outputs Provides 4 outputs mic inputs near the stage. are available locally. Qu-24 Qu-24 Qu-24 dSNAKE...
Page 6
Qu-32 Qu-32+AR84 – 8 remote inputs. Qu-32+AR2412 – Access to 24 – All inputs and outputs Provides 4 outputs mic inputs near the stage. are available locally. Qu-32 Qu-32 Qu-32 dSNAKE dSNAKE Qu-Pac – Same engine as CH1-24 Out1-12 Qu-32 but has 16 inputs and...
Page 7
The AR2412 AudioRack cannot be used as an expander in a Qu system. Scene, Library and Show memories - All Qu mixer memories are compatible. Files created on one model can be transferred via USB key and loaded on another.
Page 8
Qu mixer using a Cat5 digital snake. AR84 8 Mic/Line in, 4 Line out - Rack mount EXPANDER – To connect to the Expander port of the AR2412, or connect directly to the Qu mixer via its dSNAKE port. Inputs – Use the Preamp screen...
11.14 I/O Patch Setup – Surface Use this screen to patch signals to the rear panel Alt Out and AES outputs. Touch a box to open up the list of available options. Changes are applied instantly. You can also touch outside the list to exit.
Page 10
11.16 I/O Patch Setup – dSNAKE Out This screen presents the patching for the dSNAKE remote audio outputs. These outputs can be mapped from any combination of Qu mixer output sources. The Qu mixer detects which AudioRack type is connected. A Qu system can have up to two AudioRacks connected.