Checking The Ip Address - Canon imageCLASS MF4450 Starter Manual

Checking the IP Address

Press [ ]
(Status Monitor/Cancel).
Press [ ] or [ ] to select,
and then press [OK].
IPv4
IP Address
Subnet Mask
Gateway Address
Host Name
Check the network operation.
Start the web browser of a
computer which is connected
to a network.
Check that the screen of the Remote UI is displayed.
30 A-3
Press [ ] or [ ] to select,
and then press [OK].
Status Monitor/Cancel
Copy Job Status
Fax Job Status/Hist
...
Print Job Status
Network Information
Check the IP address.
IP Address
192.168.0.215
If the IP address displayed on the screen is
between "169.254.1.0 and 169.254.254.255"
This IP address is the one assigned by the AutoIP function.
If an IP address other than link-local addresses is set for the
computer, set an IP address in the same subnet as the computer
(other than link-local addresses) also for this machine manually.
This enables the installer to search for this machine.
e-Manual "Setting IPv4 Address"
Enter "http://<IP address of the
press the [ENTER] key on your keyboard.
The <IP address of the machine> is the
address checked in Step
Input Example: http://192.168.0.215/
When the machine is connected to a switching hub
You may not be able to connect the machine to a network even
though your network settings are appropriate. Delaying the
machine's network startup time may solve the problem.
e-Manual "Specifying the Wait Time until the Machine Connects
to a Network"
When the Remote UI is not displayed
Check the following.
•
Whether the computer and hub are connected using a LAN cable
•
Whether <Remote UI On/Off> is set to <On>
e-Manual "System Settings"
Press [ ] or [
and then press [OK].
Network Information
IPv4
IPv6
Press [
Monitor/Cancel) to
close the screen.
machine>/" in the address field, and then
.
] to select,
] (Status