Specifying Initial Fax Settings And Connecting A Telephone Cable - Canon imageCLASS MF4450 Starter Manual

1 2
Preface Installing the Machine
Specifying Initial Fax Settings and Connecting
a Telephone Cable
Operate the machine following the on-screen instructions and perform the following settings and connection.
• Registering the fax number and unit name
• Setting the fax receive mode
• Connecting a telephone line
If you are using pulse dialing, change the line type after specifying the settings.
Text Input Method
Enter information (text, symbols, and numbers)
into the machine using the following keys.
OK Numeric C #
keys
Changing the entry mode
Press [ ] to select <Entry Mode>, and then
press [OK]. You can also press [
change the entry mode.
Entry mode Available text
<A> Alphabet (capital letters) and symbols
<a> Alphabet (small letters) and symbols
<12> Numbers
Moving the cursor (entering a space)
Move the cursor by pressing [ ] or [ ]. To enter
a space, move the cursor to the end of the text
and press [ ].
1.
Register the fax number and unit name.
Press [ ].
Press [OK].
Register unit name.
(Sender name,
company name, etc.)
*Next Screen: Press OK
3
Configuring and Connecting the Fax
Entering text, symbols, and numbers
Enter with the numeric keys or [
Key
] (Tone) to
Deleting text, symbols, or numbers
To delete text, numbers, or symbols, press [
To delete all text, numbers, or symbols, press and hold [
(Clear).
Press [ ] or [ ] to select,
and then press [OK].
Perform fax setup?
Set up Now
Set up Later
Display "Fax Setup Guide" with the following operations to
perform the settings or connections if selecting <Set up Later>.
[ ] (Menu) → <Fax TX Settings> → <Fax Setup Guide>.
Enter.
Register Unit Name
ABC
<Apply>
Entry Mode: A
Press [ ] or [ ] to select
<Apply>, and then press [OK].
4
Connecting to a Computer and
Installing the Drivers
] (SYMBOLS).
Entry mode: <A> Entry mode: <a>
@ . - _ /
ABC abc
DEF def
GHI ghi
JKL jkl
MNO mno
PQRS pqrs
TUV tuv
WXYZ wxyz
(Not available)
- . * # ! " , ; : ^ ` _ = / | ' ? $ @ % & + \ ( ) [ ] { } < >
Press [OK].
Register the unit
telephone number for
this machine.
*Next Screen: Press OK
What happens with the unit name
When you send faxes, the registered information is printed
on at the top of the fax page.
Fax/Telephone Number
(FAX No.)
Sending Date/Time
01/01/2011 02:07 PM FAX 123XXXXXXX
Telephone Number
Mark
Appendix
Entry mode: <12>
1
2
3
4
5
6
7
8
9
0
(Not available)
] (Clear).
]
Enter.
Register Unit Tel No.
031234567
<Apply>
+
Press [ ] or [ ] to
select <Apply>, and then
press [OK].
Sender Name
Page Number
(Unit Name)
CANON P.0001
13