Sharp KC-D41R Operation Manual page 41

Интернет-магазин «Мистер Климат»
SYMPTOM
When the Roller / Float / Tray partition was
removed.
FLOAT
1. Insert the fl oat
under this tab.
2. Inner the tab
3. Insert the tab on the
other side of the fl oat
into the hole.
AUTO RESTART
After a power failure, automatically resume
the operation when the power recovers.
ON
(with the unit OFF)
(simultaneously for more 3 sec.)
Humidifying tray
Float
of fl oat into
the hole.
Tab
Cross-Section view
If the , , lamp lights up
for 10 seconds, the setting is
complete.
E-17
www.mrklimat.ru
REMEDY (not a malfunction)
• Install the Roller / Float / Tray partition in order
below.
Tray partition
ROLLER
Fix the roller in the tray from side way.
Float
Auto Restart can be set.
• Even when the plug is unplugged or the breaker
is thrown during the operation, the operation
resumes at the previous operation mode and
settings if the power recovers.
CANCELLATION
(with the unit OFF)
(simultaneously for more 3 sec.)
Тел. 8-800-5555-710
Click